Industrial
Productivity Tools
|
BTA compact
Sheave/Pulley
Alignment
Easy-Laser ® BTA compact™
is the perfect tool for sheave and pulley alignment.
Mounted in a few seconds, the laser
line projected onto the targets allows you to quickly ascertain and correct
the misalignment.
It couldn’t be easier! |
 |
Parallel and angular misalignment
|
Parallel misalignment
|
Angular misalignment
|
-
Shows the parallel and angular misalignment
between the sheaves.
-
Much faster and more accurate than measuring
with earlier, conventional methods.
-
For both horizontal and vertical mounted
machines.
-
Alignment can be made by one operator.
-
Also suitable for non-magnetic sheaves.
Maintenance means savings
In the industry of today,
preventive and predictive maintenance is a matter of course. When aligning
with the Easy-Laser® BTA compact™ you reduce the wear on sheaves, belts,
bearings and sealings and reduce vibrations. This will give you less downtime,
which of course means that you increase the available machine time. Time
that guarantees your income. Increased efficiency also means large energy
cost savings.
Easy for the user
The tool is attached in
a few seconds, and you can easily see the laser line projected on the targets.
When the line lies in the slots of the targets, the machine is in the right
position.
The result is a fast, precise alignment.
| Technical
data |
| Part Number |
12-0222 |
| Sheave diameters |
60 mm(2.5") diameter
and larger |
| Sheave thickness |
not depending on sheave thickness |
| Beam angle |
78° |
| Measurement distance |
10m (33 feet) |
| Battery type |
2 * R6 (AA) 1.5 V |
| Battery operation |
24 h continuously |
| Laser class |
Class 2 |
| Output power |
<1 mW |
| Laser wavelenght |
635-670 nm |
| Housing material |
ABS plastics |
| Dimensions |
188*60*28mm (7.4"*3.36"*1.1") |
| Weight |
0.3 kg (10.5 oz) |
| Targets |
2 pcs magnet targets |
| Measurement accuracy |
Better than 0.5 mm or 0.2° |
| Feature |
because of its light weight it can
be mounted on non-magnetic sheaves with double sided adhesice tape |
| Calibration |
the lasterline generated by the
tool is calibrated parallel to the two attachment magnets. Can also easily
be done in the field when necessary. |
|
